Power LED
Scenario | LED Status |
Device powered on and ready, but not paired | Blue LED will flash 3 times slowly then turn off. |
Bluetooth pairing mode activation | Blue LED will flash quickly. Pairing mode remains active for 1 minute. |
Bluetooth paired | Blue LED will remain solid for 5 seconds then turn off.
To check the device is paired press the power key once. If the device is paired the blue LED will be on for 5 seconds and then turn off. |
Battery low indication (>10%) | Red LED will flash once every 5 seconds for 20 seconds, which repeats every 2 minutes. |
Battery charging | Solid red LED |
Battery full charged | Solid green LED |
Satellite LED
Scenario | LED Status |
No connection to satellite | Red LED will flash once every 10 seconds |
Connected to satellite | Green LED will flash 5 times when connection established, then flash green once every 10 seconds to indicate the device is still connected. |
Check in LED
Scenario | LED Status |
Check in successfully sent | Solid Green LED for 5 seconds, then turns off |
Check in blocked, wait 90 seconds | Red LED will flash quickly for 5 seconds, then turn off |
Check in failed due to network error/low signal | Red LED will be on for 5 seconds, then turn off |
A message was received and stored on the device when not paired to a smartphone | Green LED will flash once every 10 seconds |